What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 04:12

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–10[John johnson John Johnson ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then describes Rainy Season and Lightning.
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–16 [ OO OLAOYE OYEBODE ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Barnstars:
Should transgender Ideology be renamed "Gender Revisionism/Biological Denialism"?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Seahawks defenders want to "put the team on our back" - NBC Sports
A fuse is a non-resetable over current circuit protector.
This device then solves the entire problem.
First Sentence:
More Americans applied for jobless benefits last week, rising to highest level in eight months - PBS
In schematic diagrams this is the symbol for a fuse:
the problem then depends on "how fast does the fuse operate?".
A circuit breaker is similar, but is resettable.
What is your best forbidden sex story that felt so right?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At least they know the answer if they wanted it.
An AC voltage/ current source, and an ac inductive load.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
nine
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The MOV will conduct when the voltage exceeds 50% of line voltage.
what exactly is a ‘surge’ protector?
Because the load is inductive, the current lags the voltage.(by a bit).
What is lightning?
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
One is “what exactly is in a ‘surge protector’ ? ”
He then asserts :
but this device (an Inductor) … impedes the rapid changes in the current.
How could Trump, with his deplorable garbage supporters, manage to win an election?
What does a fuse do?
Edit 2024–10.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
eight
Upvotes:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What are some great short jokes?
2024–10–14 [Omar Gharbi Omar Gharbi ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
I post the exact comment here.
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
This is where the MOV conducts again, and dissipated the energy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But it can get overloaded, and no longer works.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
but I think this circuit , shows a few more pieces.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The bolt then partially travels down the line to your home.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Here is a simplified AC power diagram.
One
(Dc diagram shown, AC is similar).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are three different concepts here that are getting confused.
This is 'the assistant's answer'
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There are two important concepts here.
Now when you have a certain ac resistance, then a current flows in a loop.
[image of Common-mode choke]
The third is lightning and “how it gets conducted into a home.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So, the voltage could go up to 500 volts, and the fuse will not open up.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The other is “what does a “fuse” do?”
It also is a device that limits the change in current flow.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
a photo is worth a thousand words.
[old diagram got deleted by accident]